Accessories

Slitter & Rewinder

SL-450CR / SL-340CR / SL-300CR / SL-300C
Max. web width 450mm (SL-450CR) /
340 mm (SL-340CR)
Min. slitting width (mm) 10 mm , 7 knife sets for standard
( special order to be requested )
Max. web rewind outer dia. Ø550 mm run around 1000 M ( special design to be requested )
Rewind shaft dia. 76 mm
Max. speed Connected on-line : As main machine or Working independently : 75 M / min (SL-300C working independently only)
Power 1/2 HP , 220 V / 50 (60) Hz

Advantages

  1. Can be connected on-line with main machine or working independently. (SL-300C working independently only)
  2. Equipped with sensors to count slit roll length and label quantity. Automatically stops after achieving set number.
  3. German made Auto locked slitting knives, no need to release and re-tighten screws as on other machines. Prevents improper knife angle and material wastage, minimizes time needed for adjustments, danger, and damage due to operators forgetting to lock the screws. Smart device allows for knife positioning during slitting.
  4. Includes blower to blow away web edge trim waste. Different rewind shaft diameters also available.
  5. Adjustable vacuum tension control achieves a clean trim tight roll. Unwind and rewind shafts can rewind the printed roll for use on a 2nd pass.
  6. Speed reduction system available. Reduces the slitting speed when set amount is almost achieved, reduces material wastage and maximizes machine longevity.
  7. Slitting reels divider avoids slitting reels overlapping situation when rewinding on the same shaft.

Applicable Material

Art paper, Mirror coat paper, Foil paper, PET, PVC, PP, PE, Electrostatic paper, Hologram (Laser) film, Phosphoressent film, Flockings paper, Binding cloth, Textile, Garment, Satin, Ribbon, Cardboard, Kraft, Crepe paper, Polar film, Diffuse film, Silver reflect film, Aluminum foil, Laminate copper foil, Photoelectric film, Conductor film, Soft PC plate, LCD conductor glue, Shockproof glue, High Tec. Laminate material, EMI insulator,Sponge rubber, Conductor Sponge rubber, Thermal paper, PE, Plastic Leather, Thin film (IMD), Nameplate, Heat transfer labels, Glue side printing labels, Security labels...etc materials in roll.

Standard Unit

  1. German made Auto locked slitting knife set*7 (1 set for 1 upper & lower knife, min. slitting width 10 mm)
  2. Diameter 3" (76 mm) rewind (product) air shaft
  3. Diameter 76 mm unwind shaft
  4. Counting sensor
  5. Speed reducing system
  6. Adjustable Vacuum tension device
  7. Wastage air blower
  8. Slitting reels divider
  9. Tool kit

Optional Unit

  1. Additional slitting knife set (special style can be requested)
  2. Rewind (Product) air shaft by other than 3" (76 mm) core diameter upon request
  3. Waste rewind shaft
  4. Special lift waste matrix
    *benefit for curve die-cut shape waste rewind use